Options; Eco-Drying; Extra Rinse; Detergent - Electrolux DIVA 60 cm Service Manual

4.3 Options

Every dishwasher with the EDW2500 control system is equipped with an "Options" button:
1. When Options button is pressed repeatedly, all available options are displayed in sequence
All available options are displayed on the LCD in sequence
o
The LCD shows the current setting for the option displayed
o
2. Press "OK/START" button to select the option to be modified
The LCD flashes the current setting for the option displayed
o
3. When Options button is now pressed repeatedly, all the available modifications for the selected
option are displayed in sequence
The LCD flashes the new setting for the option displayed
o
4. Press "OK/START" button to confirm the new setting
The system now returns to the cycle selection mode
o
NB: If "Cancel" button is pressed repeatedly before point 4 is reached, the system exits the options mode
and returns to the cycle selection mode, and no modification is made.
Here is a description of all the options available:
4.3.1

Eco-drying:

this option must be selected every time it is desired, and its availability depends on the duration of the cycle
that will be run. The option is selected by pressing the relative button, and the relative icon then appears on
the LCD. It is available in all programmes with at least 15 minutes of drying time (excluding "Short
Intensive", "Short", "Short 30 min", "Soak" and "Heat plates"):
Drying time is reduced to only 15 minutes
"Energy Label" programmes are shorted by 39 minutes; all other programmes are shortened by 9 minutes
4.3.2

Extra rinse:

this option must be selected every time it is desired. When it is selected, the relative icon appears on the
LCD. It can also be selected from the "Service" mode (see section 8). It is not available in the "Soak" and
"Heat plates" cycles:
A rinse with pulse washing is added that lasts around 9 minutes.
4.3.3

Detergent

•
NORMAL
•
"3 in 1": When this option is selected, it remains selected until it is disabled, and the relative icon
appears on the LCD. The option modifies the phases in the programme to optimise performance
when "3 in 1" detergent tablets are used. It is not available in the "Soak" and "Heat plates" cycles:
The programme length and the temperatures are specially varied to dissolve the detergent tablets
Water exchange (dilution drainage) is diminished)
Rinse-aid is not dispensed from the corresponding container
Regeneration (washing of resins) and salt are disabled from the corresponding container
•
"Bio": When this option is selected, it remains selected until it is disabled, and the relative icon
appears on the LCD. The option modifies the phases in the programme to optimise performance
when "bio" (organic) detergent is used and is available in all programmes:
The wash times and certain temperatures are increased (in all programmes except for "Soak" and
"Heat plates")
4.3.4

Rinse-aid:

When this option is selected, it remains selected until the setting is changed. Only when the "3in1" option is
selected, in case of not satisfying drying results, it enables or disables the delivery of rinse-aid from the
detergent dispenser. If delivery is disabled, the "Put the rinse aid" advisory does not appear on the display".
4.3.5

Water hardness:

When this option is selected, it remains selected until the setting is changed. Using a sequence of water
hardness values expressed in French degrees, the user can adjust the amount of water loaded into the
machine between regeneration steps. The adjustment is subdivided into 10 levels. If the first level is set,
the regeneration step is disabled and the "Put the salt" advisory does not appear on the display.
4.3.6

Language:

When this option is set, it remains set until the setting is changed. The language, in which the menus,
programmes, options and advisories are displayed and heard, can be changed.
14