Service; Accessing The Diagnostic Mode - Electrolux DIVA 60 cm Service Manual

9 SERVICE

A single procedure is used to access the diagnostic mode, also known as the Service mode. Once
this mode is accessed, the serviceman can:
•
read / cancel alarms
•
check the various components in the appliance for proper operation
•
start a diagnostic cycle
•
adjust the brightness and contrast of the LCD
In certain cases, when the user is not satisfied with washing performance, the serviceman can use a
special procedure to select two supplementary options that improve performance:
•
Extra rinse (cold)
•
Disabling of pulse washing (PW), enabling of continuous washing (Ctrl)

9.1 Accessing the diagnostic mode

1. Press and hold down buttons Options and Start at the same time
2. Turn on the appliance using button S0
The LCD turns on with the welcome message
3. The first message in the diagnostic mode appears:
4. Press "Options" button repeatedly to scroll through the diagnostic mode:
Number of
LCD display
presses of
button Options
--
1 ERROR CODE i
1
2
NUMERO CICLI XX
5 PULS WASHING
3
4
6 EXTRA RINSE NO
5
BRIGHTNESS 5
6
CONTRAST 5
7
HARDNESS 40-50 °TH
5. To exit the diagnostic mode:
Press "Cancel" button until the system is set to the cycle selection mode
OR
Turn off the appliance using button S0
•
•
3 LED TEST
•
4 LINE TESTS
•
alternates with
•
•
YES
•
•
•
•
(4)
Function
Display of alarms stored in memory and activation
of machine systems
Test of all LEDs and the display
Cancellation of all alarms stored in memory
Selection of test cycle
Count of all cycles executed
Enabling/disabling of pulse washing
Enabling/disabling of extra rinse
Brightness adjustment
Contrast adjustment
Adjustment of regeneration level to suit water
hardness
29
Reference
See 9.2
See 9.3
See 9.4
See 9.5
See 9.6
See 9.7
See 9.8
See 9.9