3.3 Controls
3.3.1
Turning the appliance on and off (S0)
The ON/OFF button with corresponding LED L0 is installed on all models. The S0 button is used to
turn the unit on and off. Turning off the unit with the S0 button does not cancel the programme in progress.
Important!
If the unit is plugged in, mains voltage is present on all circuit boards even when the ON/OFF button is not
pressed (when appliance is shut off).
3.3.2
Selecting programmes
The free-standing model can be equipped with up to 6 buttons (S1-S6) with 6 accompanying LEDs,
which correspond to 6 different washing programmes.
The built-in model is equipped with a button (S1) for selecting the programmes. When the button is
pressed repeatedly, the various programmes included in the machine appear in sequence on the
display.
The operation of the buttons and their number exclusively depend on the software in the machine.
3.3.3
Selecting options
The free-standing model can be equipped with up to 5 dedicated buttons (O1-O5) for selecting options.
The built-in model is equipped with 4 dedicated buttons (O2-O5) for selecting options.
The operation and number of buttons exclusively depend on the software in the machine.
In any event, the "Options" button, the "Cancel" button and and the "OK/START" button are always
present since these buttons are used to access the service mode (see section 9).
10
Free-
standing
model
Free-standing
model
Built-in model