Fluke 5730A Getting Started Manual page 55

The specifications for these coils are at 99 % confidence level and are the combined
specification of the coil and a 52120A. If the coils are used with other current
sources the calibration specification of the coils alone is 0.65 % (99 % confidence
level) from 0 Hz to 10 kHz.
Current Output (Max.)
Input Current (Max.)
Current gain
Input Voltage (Max.)
Transconductance
Frequency Maximum Output Current
DC
<10 Hz 100 A pk (70 A rms)
10 Hz to 10 kHz 170 A pk (120 A rms)
Note:
The 2 A and 20 A ranges operate at full output current from DC to 10 kHz.
Frequency
DC to 850 Hz
850 Hz to 3 kHz
3 kHz to 10 kHz
Note
Operating Limits
2 A
2 A rms
200 mA rms
10
2 V rms
1 Siemen
120 A Range Current/Frequency Limits
Maximum Current Input
±100 A
170 mA pk (120 mA rms)
Output Isolation
Maximum Voltage Signal Applied to any Output Current Terminal with respect to Earth
600 V rms, 850 V pk, limited 2 A rms, no transient overvoltages
100 V rms, 142 V pk, limited 2 A rms, no transient overvoltages
33 V rms, 47 V pk, limited 2 A rms, no transient overvoltages
Output Current Range
20 A
20 A rms
Current Input
200 mA rms
100
Voltage Input
2 V rms
10 Siemens
±100 mA
100 mA pk (70 mA rms)
Multifunction Calibrator
Electrical Specifications
120 A
120 A rms
120 mA rms
1,000
1.2 V rms
100 Siemens
Maximum Voltage Input
±1.0 V
1.0 V pk (0.7 V rms)
1.7 V pk (1.2 V rms)
45