Fluke 5730A Getting Started Manual page 33

Weight
5730A ................................................................. 27 kg (62 lb)
5725A ................................................................. 32 kg (70 lb)
Size
5730A
Height ............................................................. 17.8 cm (7 in), standard rack increment, plus 1.5 cm (0.6 in) for feet
Width ............................................................... 43.2 cm (17 in), standard rack width
Depth .............................................................. 64.8 cm (25.5 in), overall; 59.4 cm (23.4 in), rack depth
5725A
Height ............................................................. 13.3 cm (5.25 in)
Width and Depth ............................................. Both units project 5.1 cm (2 in) from rack front.
Artifact Calibration Standards Requirements
The following external standards are necessary to calibrate the 5730A to the listed specification. Each external
standard used must have an uncertainty equal to or less than the listed uncertainty limit.
Traceable
Fluke Standard
Quantity
732B Voltage
742A-1 Resistance
742A-10k Resistance
43.2 cm (17 in)
64.8 cm (25.5 in)
Figure 5. Product Dimensions
Nominal Value Uncertainty Limit
10 V 1.5 ppm
10 ppm
1 Ω
2 ppm
10 kΩ
17.8 cm (7 in)
6.35 cm (2.5 in)
For cable
access
5730A Specifications Susceptible to
Uncertainty Limit
dc volts, ac volts, dc current, ac current
1 Ω, 1.9 Ω
ac current, dc current 10 Ω to 100 MΩ
Multifunction Calibrator
General Specifications
hhp002.eps
23