Ryobi RLT254CDSO User Manual page 17

IMPORTANT: Some of the following symbols may be used on your tool. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the tool better and safer.
Safety alert
Read and understand all instructions before operating the product, follow all warnings and safety
instructions.
Wear eye, hearing and head protection when operating this equipment.
Beware of thrown or flying objects. Keep all bystanders, especially children and pets, at least
15m away from the operating area
The product is not intended for use with a toothed saw type blade.
Do not use metal blade(s) on the product.
Rotational direction and maximum speed of the shaft for the cutting attachment.
Use unleaded petrol intended for motor vehicle use with an octane rating of 91 [(R + M)/2] or
higher.
Use synthetic 2-stroke lubricant for air cooled engines.
Mix the fuel mix thoroughly and also each time before refuelling
Keep hands away from blades.
Run position
Set the choke lever to "FULL" choke position.
Set the choke lever to "HALF" choke position.
Press the primer bulb 10 times.
English (Original instructions)
SYMBOLS
Explanation
15