Printing Images Using The Dpof Settings; Disconnecting The Usb Cable - Pentax K-m/K2000 Operating Manual

Printing Images Using the DPOF Settings

1
Use the four-way controller (23) to select [DPOF
AUTOPRINT] in the PictBridge menu.
2
Press the 4 button.
The print with DPOF settings screen
appears.
Use the four-way controller (45) to
check the number of copies for each
image, whether the date is imprinted or
not, and total number of copies.
3
Press the 4 button.
The print settings confirmation screen appears.
Refer to Steps 7 to 10 of p.207 for details on how to change the settings.
4
Use the four-way controller (23) to select [Printing
starts] and press the 4 button.
The images are printed according to the settings.
Press the 3 button to cancel printing.

Disconnecting the USB Cable

Disconnect the USB cable from the camera and printer when you have
finished printing.
1
Turn off the camera.
2
Disconnect the USB cable from the camera and printer.
100-0046 100-0046 100-0046
Print with DPOF settings Print with DPOF settings
Copies Copies 1 1 Date Date
Total Total 10 10 10
OK
MENU
209
Print Print
9