Pentax K-m/K2000 Operating Manual page 258

256
Problem
The subject
is not in
focus
The AE lock
function
does not
operate
The flash
does not
discharge
The power
zoom
system does
not function
The USB
connection
with a
computer
does not
12
work
properly
Cause
AF Mode is set to
k
The Capture mode
is set to \ in Picture
mode, or n, R, Y
or l in H mode.
The exposure mode
is set to a mode or
the shutter speed is
set to h
When Flash Mode is
set to g or C , the
flash will not
discharge if the
subject is bright
Mode dial is set to a
H mode is set to
A, K, n, m or E
The camera does
not have the power
zoom function
The USB
Connection is set to
[PictBridge]
Remedy
Autofocus is not locked (focus lock) when
AF Mode is set to k (including when the
setting is automatically selected in f).
The camera will continue focusing on the
subject while the shutter release button is
pressed halfway. If there is a subject that
you want to focus on, set AF Mode to l
(Single mode) and use the focus lock.
(p.111)
Set Caputure mode to any setting other than
\ (Moving Object) in Picture mode, or
n (Stage Lighting), R (Kids), Y (Pet) or
l (Night Snap) in H (Scene) mode.
(p.80)
Set the exposure mode to any setting other
than a (Manual) mode, or set the shutter
speed to any setting other than h.
(p.98, 100)
Set Flash Mode to b (Flash On) or D
(Flash On+Red-eye). (p.65)
Set mode dial to any setting other than
a (Flash Off). (p.80)
Set H (Scene) mode to any setting other
than A (Night Scene), K (Sunset),
n (Stage Lighting), m (Candlelight) or
E (Museum). (p.82)
Use manual zoom. (p.64)
Set [USB Connection] in the [R Set-up 2]
menu to [PC]. (p.204)
Refer to p.11 of the "PENTAX PHOTO
Browser 3/PENTAX PHOTO Laboratory 3
Operating Manual" for details on connecting
the camera to a computer.