Pentax K-m/K2000 Operating Manual page 164

162
6
Press the 4 button.
The camera returns to the [White
Balance] screen.
Tune using steps in "Fine-Tuning the
White Balance" if fine-tuning is
necessary.
7
Press the 4 button.
The camera is ready to take a picture with the set White Balance.
• No image is recorded when the shutter release button is pressed to adjust
the white balance.
• [NG] appears when measuring is unsuccessful. Press the 4 button while
displayed to return to the [Adjust White Balance] screen for remeasuring.
• If the picture is extremely overexposed or underexposed, white balance may
not be adjusted. In this case, adjust appropriate exposure and adjust the
white balance.
6
Fine-Tuning the White Balance
You can fine tune the white balance settings.
1
Set [8. Adjust White Balance] in
the [A Custom Setting 2] menu
to [On].
2
Perform desired settings in Steps 1 to 3 on p.159.
White Balance White Balance
Manual Manual
Adjust Adjust
SHUTTER
8. Adjust White Balance
Off
On
Adjustment is enabled in
the white balance settings
Check Check
OK OK
OK