Pentax K-m/K2000 Operating Manual page 165

3
Press the four-way controller (5).
The [Adjust White Balance] screen appears.
4
Use the four-way controller
(2345) to fine tune White
Balance.
Seven levels and 225 patterns are
available on the G-M and B-A axes.
G-M Adjusts the tone of the colors between green and magenta.
B-A Adjusts the tone of the colors between blue and amber.
5
Press the 4 button.
The camera returns to the [White Balance] screen.
6
Press the 4 button.
The camera returns to the status screen and is ready to take a picture.
• If [8. Adjust White Balance] in the [A Custom Setting 2] menu is set to [Off]
after White Balance is adjusted, the adjusted values become invalid. Set [8.
Adjust White Balance] to [On] again to enable the values used previously.
• When set to K (Manual), White Balance can also be measured in the [Adjust
White Balance] screen by pressing the shutter release button fully.
Shade Shade
B B
G1 G1 G1 ±0 ±0
Cancel Cancel
MENU
163
WB± WB±
G G
A A A
M M
OK OK
OK
23
45
6