Printing Images Using The Dpof Settings; Disconnecting The Usb Cable - Pentax K110D Operating Manual

92

Printing Images Using the DPOF Settings

1
Use the four-way controller (mn) to select [DPOF
AUTOPRINT] on the PictBridge menu.
2
Press the 4 button.
The Print w/DPOF settings screen
appears. Use the four-way controller
3
(op) to check the number of copies for
each image, whether the date is
imprinted or not, and total number of
copies. Print settings are set with the
Print Service. (p.82)
3
Press the 4 button.
The print settings confirmation screen appears.
Refer to Steps 7 and 11 of "Printing Single Images" (p.89 and 90) for
details on how to change the settings.
4
Press the 4 button on the print settings confirmation
screen.
The images are printed according to the settings.
Press the 3 button to cancel printing.

Disconnecting the USB Cable

Disconnect the USB cable from the camera and printer when you have
finished printing.
1
Turn off the camera.
2
Disconnect the USB cable from the camera and printer.
Print w/DPOF settings Print w/DPOF settings Print w/DPOF settings
Copies Copies Copies 1 1 Date Date Date
Total Total Total
10 10 10
Print Print Print
OK