Using The Control Panel - Pentax K-m/K2000 Operating Manual

Using the Control Panel

While shooting, the current settings can be checked on the status screen.
You can also switch the display to the control panel and change settings.
Following, how to set the JPEG Quality will be explained as an example.
1
Check the status screen and then
press the 4 button.
The control panel appears.
Press the M button when the status
screen is not displayed.
2
Use the four-way controller
(2345) to select an item you
want to change the setting for.
You cannot select the item that cannot be
changed.
3
Press the 4 button.
The setup screen of the selected item
appears.
=s q\
1/ 2 0
5 . 6
F
ISO
AWB
AUTO
AF.S
10
JPEG
OFF OFF
OK
Flash Mode Flash Mode
Auto discharge Auto discharge
ISO
AWB
AUTO
AF.A
10
JPEG
OFF OFF
JPEG Quality JPEG Quality
ISO
AWB
AUTO
AF.A
10
JPEG
OFF OFF
31
1
123
400
M
400
M
400
M