Pentax K-m/K2000 Operating Manual page 81

Menu Item
15. Flash in
Wireless Mode
16. WB when using
flash
17. Display
Sensitivity
A3
18. Catch-in focus
19. Using aperture
ring
20. Power lamp
21. Display status
Reset Custom
A4
function
Function
Sets the built-in flash discharge method in
Wireless Mode.
Sets whether to change the White Balance
setting when using flash to [Flash].
Sets whether to switch the number of
recordable images in the viewfinder to the
sensitivity display.
When set to [On], if the AF Mode is set to
f or l and a manual focus lens is
attached, catch-in focus shooting is
possible and the shutter is released
automatically when the subject comes into
focus.
Sets to enable shutter release when lens
aperture ring is set at other than the s
position.
Changes the brightness of the power lamp. p.227
Sets whether the status screen is always
displayed on the monitor.
Resets all the settings in the [A Custom
Setting 1-3] menu to the defaults.
79
Page
p.144
p.160
–
p.118
4
p.241
p.221
p.233