Turning Fcw On Or Off; Changing Fcw And Active Braking Status - Chrysler 300 2017 Owner's Manual
Hide thumbs
Also See for 300 2017:
- Quick reference manual (17 pages) ,
- User manual (236 pages) ,
- Owner's manual (585 pages)
Table of Contents
Advertisement
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
• It is unsafe to test the FCW system. To prevent such
misuse of the system, after four Active Braking events
within an ignition cycle, the Active Braking portion of
FCW will be deactivated until the next ignition cycle.
• The FCW system is intended for on-road use only. If the
vehicle is taken off-road, the FCW system should be
deactivated to prevent unnecessary warnings to the
surroundings.
WARNING!
Forward Collision Warning (FCW) is not intended to
avoid a collision on its own, nor can FCW detect every
type of potential collision. The driver has the respon-
sibility to avoid a collision by controlling the vehicle
via braking and steering. Failure to follow this warn-
ing could lead to serious injury or death.
Turning FCW On Or Off
NOTE: The default status of FCW is on; this allows the
system to warn you of a possible collision with the vehicle
in front of you.
The Forward Collision activation/deactivation is located in
Uconnect Settings under Safety and Driving Assistance .
Forward Collision can be checked or unchecked.
When FCW is selected off, there will be an FCW OFF icon
that appears in the instrument cluster display.
Changing the FCW status to off prevents the system from
warning you of a possible collision with the vehicle in front
of you.
NOTE: The FCW system state is kept in memory from one
key cycle to the next. If the system is turned off, it will
remain off when the vehicle is restarted.
Changing FCW And Active Braking Status
The FCW Sensitivity and Active Braking settings are pro-
grammable through the Uconnect System. Refer to
"Uconnect Settings" in "Understanding Your Instrument
Panel" for further information.
The default status of FCW is the "Far" setting and the
Active Braking is the "on" setting; this allows the system to
warn you of a possible collision with the vehicle in front of
you when you are farther away and it applies limited
braking. This gives you the most reaction time to avoid a
possible collision.
Changing the FCW status to the "Near" setting, allows the
system to warn you of a possible collision with the vehicle
in front of you when you are much closer. This setting
Advertisement
Chapters
Table of Contents
