Headlight Time Delay; Automatic High Beam Headlamp Control - If Equipped - Chrysler 300 2017 Owner's Manual

118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
NOTE: The "Headlights On With Wipers" feature can be
turned on or off using the Uconnect System. Refer to
"Uconnect Settings/Customer Programmable Features" in
"Understanding Your Instrument Panel" for further infor-
mation.

Headlight Time Delay

This feature provides the safety of headlight illumination
for up to 90 seconds (programmable) when leaving your
vehicle in an unlit area.
To activate the delay feature, place the ignition in the OFF
position while the headlights are still on. Then, turn off the
headlights within 45 seconds. The delay interval begins
when the headlight switch is turned off.
If you turn the headlights or parking lights on, or place the
ignition in ACC or RUN, the system will cancel the delay.
If you turn the headlights off before the ignition, they will
turn off in the normal manner.
NOTE:
• The lights must be turned off within 45 seconds of
placing the ignition in the OFF position to activate this
feature.
• The headlight delay time is programmable using the
Uconnect System, refer to "Uconnect Settings/Customer
Programmable Features" in "Understanding Your In-
strument Panel" for further information.
Automatic High Beam Headlamp Control — If
Equipped
The Automatic High Beam Headlamp Control system
provides increased forward lighting at night by automat-
ing high beam control through the use of a digital camera
mounted on the windshield. This camera detects vehicle
specific light and automatically switches from high beams
to low beams until the approaching vehicle is out of view.