Wheel And Tire Torque Specifications; Torque Specifications - Chrysler 300 2017 Owner's Manual

CAUTION!
Driving with a hot cooling system could damage your
vehicle. If the temperature gauge reads "H," pull over
and stop the vehicle. Idle the vehicle with the air
conditioner turned off until the pointer drops back
into the normal range. If the pointer remains on the
"H," turn the engine off immediately and call for
service.

WHEEL AND TIRE TORQUE SPECIFICATIONS

Proper lug nut/bolt torque is very important to ensure that
the wheel is properly mounted to the vehicle. Any time a
wheel has been removed and reinstalled on the vehicle, the
lug nuts/bolts should be torqued using a properly cali-
brated torque wrench.

Torque Specifications

Lug Nut/Bolt Torque
130 Ft-Lbs (176 N·m)
**Lug Nut/ Lug Nut/Bolt
Bolt Size Socket Size
M14 x 1.50 22 mm
WHAT TO DO IN EMERGENCIES 381
**Use only your authorized dealer recommended lug nuts/
bolts and clean or remove any dirt or oil before tightening.
Inspect the wheel mounting surface prior to mounting the
tire and remove any corrosion or loose particles.
Wheel Mounting Surface
Tighten the lug nuts/bolts in a star pattern until each
nut/bolt has been tightened twice.
After 25 miles (40 km), check the lug nut/bolt torque to be
sure that all the lug nuts/bolts are properly seated against
the wheel.
6