Anti-Lock Brake Warning Light; Brake Assist System (Bas) - Chrysler 300 2017 Owner's Manual

320 STARTING AND OPERATING
WARNING! (Continued)
that could jeopardize the user's safety or the safety of
others.
ABS is designed to function with the OEM tires. Modifica-
tion may result in degraded ABS performance.

Anti-Lock Brake Warning Light

The yellow "Anti-Lock Brake Warning Light" will turn on
when the ignition switch is turned to the ON position and
may stay on for as long as four seconds.
If the "Anti-Lock Brake Warning Light" remains on or
comes on while driving, it indicates that the anti-lock
portion of the brake system is not functioning and that
service is required. However, the conventional brake sys-
tem will continue to operate normally if the "Brake System
Warning Light" is not on.
If the "Anti-Lock Brake Warning Light" is on, the brake
system should be serviced as soon as possible to restore the
benefits of anti-lock brakes. If the "Anti-Lock Brake Warn-
ing Light" does not come on when the ignition switch is
turned to the ON position, have the light repaired as soon
as possible.

Brake Assist System (BAS)

The BAS is designed to optimize the vehicle's braking
capability during emergency braking maneuvers. The sys-
tem detects an emergency braking situation by sensing the
rate and amount of brake application and then applies
optimum pressure to the brakes. This can help reduce
braking distances. The BAS complements the anti-lock
brake system (ABS). Applying the brakes very quickly
results in the best BAS assistance. To receive the benefit of
the system, you must apply continuous braking pressure
during the stopping sequence, (do not "pump" the brakes).
Do not reduce brake pedal pressure unless braking is no
longer desired. Once the brake pedal is released, the BAS is
deactivated.
WARNING!
The Brake Assist System (BAS) cannot prevent the
natural laws of physics from acting on the vehicle, nor
can it increase the traction afforded by prevailing road
conditions. BAS cannot prevent collisions, including
those resulting from excessive speed in turns, driving
on very slippery surfaces, or hydroplaning. The capa-
bilities of a BAS-equipped vehicle must never be
(Continued)