Table of Contents
Advertisement
Anti-Lock Brake Warning Light
The amber "Anti-Lock Brake Warning Light" will turn on
when the ignition switch is turned to the ON position
and may stay on for as long as four seconds.
If the "Anti-Lock Brake Warning Light" remains on or
comes on while driving, it indicates that the anti-lock
portion of the brake system is not functioning and that
service is required. However, the conventional brake
system will continue to operate normally if the "Brake
System Warning Light" is not on.
If the "Anti-Lock Brake Warning Light" is on, the brake
system should be serviced as soon as possible to restore
the benefits of anti-lock brakes. If the "Anti-Lock Brake
Warning Light" does not come on when the ignition
switch is turned to the ON position, have the light
repaired as soon as possible.
Brake Assist System (BAS)
The BAS is designed to optimize the vehicle's braking
capability during emergency braking maneuvers. The
system detects an emergency braking situation by sens-
ing the rate and amount of brake application and then
applies optimum pressure to the brakes. This can help
reduce braking distances. The BAS complements the
anti-lock brake system (ABS). Applying the brakes very
quickly results in the best BAS assistance. To receive the
benefit of the system, you must apply continuous brak-
ing pressure during the stopping sequence, (do not
"pump" the brakes). Do not reduce brake pedal pressure
unless braking is no longer desired. Once the brake pedal
is released, the BAS is deactivated.
STARTING AND OPERATING 405
5
Advertisement
Chapters
Table of Contents
