Moneris PAYD PIN Setup Manual

Mobile payment app

Hide thumbs

page of 14

/ 14
Bookmarks

Quick Links

Download this manual

T M

R E A D

M E N T

B E P A Y

Moneris PAYD

PIN pad (iCMP) Setup Guide

Let's get started

Need help?

Do you have a question about the PAYD PIN and is the answer not in the manual?

Questions and answers

Summary of Contents for Moneris PAYD PIN

Page 1 R E A D M E N T B E P A Y Moneris PAYD PIN pad (iCMP) Setup Guide Let’s get started...
Page 2 Pairing the PAYD PIN pad with your mobile device – • How to pair the PAYD PIN pad with your mobile device via Bluetooth ® Initializing the PAYD PIN pad – P.11 • How to initialize the PAYD PIN pad from the mobile payment app on your mobile device.
Page 3: Before You Begin
Wait while the PAYD PIN pad powers up. d. When you see the TELIUM MENU screen, set the PAYD PIN pad aside, and leave it to charge for 3 hours. After 3 hours have elapsed, go to Setting up the features on the PAYD PIN pad on page 2.
Page 4 Let’s begin by setting up the features on the PAYD PIN pad. Note: Leave the PAYD PIN pad connected to an external power source while you perform these setup steps. Confirm that the TELIUM MENU screen is displayed on the PAYD PIN pad before you proceed.
Page 5 5. Enable the card removal reminder When you see the BEEP screen, press F1 (ON). This will enable the PAYD PIN pad to beep at the end of a transaction to remind your customers to remove their chip card.
Page 6 Pairing the PAYD PIN pad with your mobile device Follow these steps carefully to pair the PAYD PIN pad with your mobile device via Bluetooth. Don’t worry: you’ll only have to do this once. Note: Leave the PAYD PIN pad connected to the external power source while you perform the following steps.
Page 7 2. Enable SSP mode on the PAYD PIN pad On the PAYD PIN pad’s WELCOME/BONJOUR screen, simultaneously press and hold down .,#* the yellow key and the key. Wait while the PAYD PIN pad reboots (this will take several seconds).
Page 8 U-VVVV-I6012345 When you see the TELIUM MENU screen, the PAYD PIN pad is ready to pair with your mobile device: Note: If you see the WELCOME/BONJOUR screen instead, go back to step 3a on this page. • To pair the PAYD PIN pad with an iPhone...
Page 9 Pairing with an iPhone, iPad, or iPod touch Note: Leave the PAYD PIN pad connected to an external power source while you perform the following setup steps. Ensure that the Bluetooth menu is displayed on your iPhone, iPad, or iPod touch (collectively referred to as “mobile device”).
Page 10 On the PAYD PIN pad, you will see Pairing Success and then the BT PAIRING menu. Note: Your mobile device will indicate the PAYD PIN pad ID is “Connected”. (If your mobile device prompts you to download or install an app, decline the prompt, and continue the setup steps below.) •...
Page 11 When you see the 8-digit PAYD PIN pad ID (e.g., I6023456) on your mobile device, tap the PAYD PIN pad ID. Note: The ID always starts with “I6” and is printed on a label affixed to the back of the PAYD PIN pad. M O N E R I S PAY D...
Page 12 • On your mobile device, you will see a confirmation request, with a 6-digit passkey. • On the PAYD PIN pad, you will see the same 6-digit passkey. On your mobile device, tap OK (or Pair); then on the PAYD PIN pad, press the green key.
Page 13 Initializing the PAYD PIN pad Now you can initialize the PAYD PIN pad from the mobile payment app on your mobile device. For instructions on how to initialize the PAYD PIN pad, refer to the “Getting Started” section of your Welcome Email.
Page 14 Moneris Solutions Corporation (“Moneris”). This guide is for informational purposes only. Neither Moneris nor any of its affiliates shall be liable for any direct, indirect, incidental, consequential or punitive damages arising out of use of any of the information contained in this guide.

This manual is also suitable for:

Payd