Mo Flo (Modulation Output Flow) - Pentair IntelliComm Installation And User Manual

28

Mo Flo (Modulation Output Flow)

M.O. Flo (Modulated Output Flow) is specifically designed for Pentair branded heaters with an
IntelliComm, although it can be used for other functions, such as water effects. This feature allows you to
have flexibility in flow control if the filter cycle flow is less than needed for certain devices. M.O. Flo also
allows you to program intervals of flow separated by a specific duration which can be useful for water
effects.
To setup the M.O. Flow option:
1. Ensure that the green power LED is on and the pump is stopped.
2. Press the Menu button. Press the Up or Down arrows to select the "Features" menu. Press the
Down arrow button to select M.O. Flow. Press the Select button to access the M.O. Flow menu
settings. The M.O.Flow "Activation" setting is displayed.
3.
To enable M.O. Flow:
already selected. Press the Enter button to save the setting.
4.
To set the flow rate for M.O. Flow:
the Select button to access the setting. To edit the flow rate (GPM) setting, see step 6.
5.
To set the run and interval time for M.O. Flow:
Time" or Set Interval Time" setting. Press the Select button to access the setting. To edit the start
and stop time, see step 6.
6. Press the Select button to change the current value.
7. To change the value, press the Left and Right arrows to select which digit to modify, then use the Up
and Down arrows to change the selected digit.
8. When you are done, press the Enter button to save the changes. To cancel any changes, press the
Escape button to exit edit mode without saving.
IntelliFlo ®
Features 7:22
M.O. Flo
Back
Filter Vacuum Manual
Wash
Enter
On
Warn.
Alarm
Feature Feature Start
Reset
1 2 Stop
The following graphical representation shows when the M.O. Flo feature is enabled.
Flow
Run time Interval time
IntelliFlo Installation and User's Guide
Press the Select button then the Down arrow button to select Enabled if not
Press the Down arrow button to select "Set Flow" setting. Press
®
IntelliFlo IntelliFlo
M.O. Flo M.O. Flo 7:29 7:29 M.O. Flo M.O. Flo
Disabled Disabled 50.GPM 50.GPM
Activation Activation Set Flow Set Flow
Back
Filter Vacuum Manual Filter Vacuum
Wash Wash
On Enter On Enter
Warn. Warn.
Alarm Alarm
Feature Feature Start Feature Feature
Reset
1 2 Stop 1 2
Enable/ Disable Set Flow
M.O.Flo
set Flow
Programmed
Cycle
Press the Down arrow button to select "Set Run
® ®
IntelliFlo
7:29 7:29 M.O. Flo M.O. Flo 7:30 7:30
0:01 0:01
Set Run Time Set Run Time
Back Back
Manual Filter Vacuum Manual
Wash
On Enter On
Warn. Warn.
Alarm Alarm
Start Feature Feature Start
Reset Reset
Stop 1 2 Stop
Set Run Time Set Interval Time
Time
®
IntelliFlo
M.O. Flo M.O. Flo 7:31 7:31
1:00 1:00
Set Interval Time Set Interval Time
Back
Filter Vacuum Manual
Wash
Enter
Feature Feature Start
Reset
1 2 Stop