Pentair IntelliComm Installation And User Manual page 16

10
Manual Mode
(Continued)
To change the Set Flow and Set Speed features:
1. Ensure that the green power LED is on.
2. Press the Manual button (LED is on).
3. Use the Up and Down arrow buttons to select Set Flow, then press the Select button to
Set Flow:
edit the setting.
4. To change the setting, press the Left and Right arrows to select which digit to modify, then use the
Up and Down arrows to change the selected digit. The preset flow values can be set to 15 to 130
GPM (default 50 GPM).
5. When you are done, press the Enter button to save the changes. To cancel any changes, press the
Escape button to exit edit mode without saving.
6. Use the Up and Down arrows to select Set Speed, then press the Select button to edit
Set Speed:
the setting. The preset speed can be set to 400 to 3450 RPM maximum (default 1000 RPM).
On
Warn.
Alarm
Cursor hi-lights in
7. To change the setting, press the Left and Right arrows to select which digit to modify, then use the
Up and Down arrows to change the selected digit.
8. When you are done, press the Enter button to save the changes. To cancel any changes, press the
Escape button to exit edit mode without saving.
IntelliFlo Installation and User's Guide
®
IntelliFlo
12:15
MANUAL
0010.RPM
Set SPEED
STOPPED
Back
Filter Vacuum Manual
Wash
Enter
Feature Feature Start
Reset
1 2 Stop
Cursor Hi-lights
black
in Black
®
IntelliFlo
12:15
MANUAL
0010.RPM
Set SPEED
STOPPED
Back
Filter Vacuum Manual
Wash
On Enter
Warn.
Alarm
Feature Feature Start
Reset
1 2 Stop
Left/Right arrow
Arrow Keys to
buttons to change
change Values
digit
®
IntelliFlo
12:15
MANUAL
1010.RPM
Set SPEED
STOPPED
Enter
Back
Filter Vacuum Manual
Wash
Start
Stop
On Enter
Warn.
Alarm
Feature Feature Start
Reset
1 2 Stop
Press the Enter
Hit Enter and
button to save.
Start/Stop
Press Start/Stop