Vacuum Mode; Vacuum Menu - Pentair IntelliComm Installation And User Manual

Vacuum Mode

Use Vacuum mode to clean the pool manually. Vacuum mode only operates in flow control. Vacuum mode
shuts off all sensors. This mode is identical to Feature 1 and 2 except that you can manually start this mode
using the Vacuum button. Safety considerations should be made when setting the Vacuum flow parameter.
CAUTION: Since vacuuming is manual work and the user will be at the pool, the "Blocked System"
will be switched off, it is important not to use any kind of automatic cleaners, (such as Kreepy
Krauly, etc.) with Vacuum mode.

Vacuum menu

To access the Vacuum menu:
1. Ensure that the green power LED is on and the pump is stopped.
2. Press the Menu button. Press the Up or Down arrows to select the "Vacuum"
menu.
3.
To set the vacuum flow parameter:
parameter is displayed. To edit the vacuum preset flow parameter, see step 5.
This parameter can be set from 15 GPM to 130 GPM. The default setting is 50
GPM.
4.
To set the vacuum duration parameter:
"Vacuum Duration" menu. To edit this setting, see step 5.
This parameter can be set from 1 to 600 minutes. The default setting
is 10 minutes. This setting is the amount of time you wish to run
vacuum mode.
5. To change the value, press the Left and Right arrows to select which
digit to modify, then use the Up and Down arrows to change the selected
digit.
6. When you are done, press the Enter button to save the changes. To
cancel any changes, press the Escape button to exit edit mode
without saving.
To start Vacuum mode:
1. Press the Vacuum button to start the vacuum mode and to run at the preset vacuum flow for the
preset vacuum cycle time.
2. After the preset cycle time, IntelliFlo will stop.
Press the Select button, the "Vacuum Flow"
Press the Up or Down arrows to select the
IntelliFlo
MENU
Vacuum
Filter Vacuum
On Enter
Warn.
Alarm
Feature Feature
1 2
®
IntelliFlo IntelliFlo
Vacuum Vacu um 8:13 8:13 Vacu Vacuum um
50.GPM 50.GPM 0:01 0:01
Vacuum Vacu um Flow Flow Vacuum Vacu um Duration Duration
Back
Filter Vacuum Manual Filter Vacuum
Wash
On Enter On Enter
Warn. Warn.
Alarm Alarm
Feature Feature Start Feature Feature
Reset
1 2 Stop 1 2
Vacuum Flow and Duration
IntelliFlo Installation and User's Guide
35
®
8:09
Back
Manual
Wash
Start
Reset
Stop
®
8:22 8:22
Back
Manual
Wash
Start
Reset
Stop