Modulated Output - Pentair IntelliFlo VF Quick Start Manual

Modulated Output

(M.O. Flo)
Enabling M.O. Flo
Setting M.O. Flo
Flow Rate
Setting M.O. Flo
Run Time and
Interval Settings
16
The Modulated Output feature automatically increases pump flow to allow the
system heater to check the water temp and switch on if necessary. This feature also
allows flow control flexibility if filter cycle flow is less than needed for certain devices.
M.O. Flo also allows you to program flow intervals that can be used for water effects.
You will need to enable M.O. Flo, and set the flow rate, run times, and intervals
between run times. M.O. Flo will operate only during the "Filter Mode" time cycles.
Press or to select M.O. Flo.
settings.
Press and
Press to access Set Flow setting.
Press and to select digit to modify. Change values by pressing
When value is set, press
Press to access Set Run Time or Set Interval Time.
Press to access setting. Press
Change values by pressing
When value is set, press
Press
to enable. Press to save.
Enter
Press
to confirm value and save changes.
Enter
and
and .
to confirm value and save changes.
Enter
to access M.O. Flo menu
to access setting.
and
to select digit to modify.
IntelliFlo Pump Quick-Start Guide
® VF