Filter Mode
(Continued)
Flow Control and Filter Mode
The Filter Mode feature provides the ability of overcoming head pressure loss to provide the required flow
through the plumbing. The flow that the unit can provide is limited by the installed plumbing. If more flow is
demanded than the IntelliFlo can provide, it will ramp to full speed and create pressure.
The following example shows a ramp as flow increases from 50 to 75 GPM.
Speed
Series of
2
small slow
ramps
50 GPM
1
Valve is moved
75 GPM
Power and RPM
stabilize and
3
required flow is
attained
Ramps in
Speed
Quickly
Time
IntelliFlo Installation and User's Guide
21