Description Of Monitor And Controls - Eneo VMC-8LCD-CM01B Installation And Operating Instructions Manual

4. Description of Monitor and Controls

1 MODE
PC (RGB) / AV selection function
Press the MODE button to be appeared source select OSD box and press the MODE button
repeatedly, then press the MENU button or wait 3 seconds to select highlighted source.
• If PC Picture size does not match with full horizontal or vertical screen size, press
2 MENU Button to Setup Screen and Function
Press the MENU button to be appeared menu OSD box and press the MODE button
repeatedly to select the main menu (Picture menu, Setup menu), then press the Up button
to enter the sub menu, press the MODE button repeatedly to highlight icon that user wants,
press the Down/Up button to increase, decrease or change the function.
Push the MENU button once to return to the main menu to select another function or press
twice to exit from the OSD.
3 DOWN
without function
4 UP
without function
5 POWER
Power On/Off
6 Remote Sensor
Sensor for receiving signal from the remote control
the MODE button continuously (2-3 seconds) and wait for a little while then you
can see the most appropriate screen.
 4
6
5
 3
5