3. Hardware Setup
Before Using the BOX-PC for the First Time
Follow the next steps to set up the BOX-PC:
STEP1
Install the hard disk and set jumper switches.
By referring to the information in this chapter, set the BOX-PC.
STEP2
Connect cables.
Connect necessary external devices, such as COM and a CRT, to this product using
appropriate cables.
STEP3
Turn on the power.
After verifying that you have correctly followed steps 1 and 2, turn on the power. If you feel
something is wrong after turning on the power, turn off the power immediately and check to
see if the BOX-PC has been set up correctly.
STEP4
Set up BIOS.
By referring to Chapter 4, set up BIOS. This setup requires a keyboard and a display.
* Before using the BOX-PC, be sure to execute " LOAD SETUP DEFAULTS" to initialize
the BIOS settings to their default values.
(See Chapter 4, "Main Menu.")
CAUTION
If your BOX-PC is a Windows preinstalled model, be sure to connect the keyboard and mouse to it
before turning the power on for the first time.
User's Manual
3. Hardware Setup
15