Height Adjustable Swingaway Armrests - progeo Exelle User Manual

Table 3 : Complete list of possible combinations
Hole B
right
Swingaway armrests
Transit wheels
Anti-tipper wheels
Swingaway armrests
Anti-tipper wheels
Swingaway armrests
Swingaway armrests
Porta stampelle
Tipping aid
Transit wheels
Crutch support
Transit wheels
Crutch support Transit wheels

7.1 Height adjustable swingaway armrests

(figure 73)
The removable swingaway and height adjustable armrests are
inserted into the accessory support (see table 3), which is shaped
in order to accept and block (in rotation) the screw A fixed to
the tube of the armrest itself.
To adjust the height of the armrest, remove (using a 4mm Allen
key) the fixing screws A .
Raise or lower the armrest by sliding it up or down the support S
(as indicated by the arrow in figure 71), until the desired height is
reached.
After adjusting the height, re-tighten the screws A in the
nearest pre-drilled holes.
To facilitate adjustment, it is possible to rotate the armrest by
180° (figure 72) or simply remove it completely.
Exelle
40
Swingaway armrests Transit wheels
Swingaway armrests Tipping aid
Swingaway armrests Crutch support
Swingaway armrests Tipping aid
Anti-tip wheels Transit wheels
Anti-tip wheels Transit wheels
Tipping aid Transit wheels
To rotate the armrest, lift it enough to free the blocking screw A
from the groove on the support S and rotate it outward by 180°
(see figure 72).
In order to rotate or remove the armrest, first remove
the fixing pin P . After every adjustment or rotation of
the armrest and before using the wheelchair, insert the
fixing pin in the hole present on the support S turned
towards the interior of the wheelchair in order to avoid
contact with the spokes of the rear wheel.
Do not use the armrest as a hand hold for lifting
purposes. If the armrest is not fixed using the fixing
pin it is possible that, during normal use, the
armrest will come out completely causing possible
injury to the user.