List Of Parts In Standard Set Up - progeo Exelle User Manual

Lending your wheelchair to others could cause it to
function unsafely and tip over with potentially serious
consequences.
The wheelchair supplied by RehaTEAM® has been
tested and set up to ensure optimum performance.
It is forbidden to carry out any modifications (even
when possible) different to the original design. All
modifications which can be made by the user are
detailed in this chapter but must only be carried
out as maintenance , in order to return it to its
original condition (the condition in which it was
originally supplied).
Always contact RehaTEAM® and its technicians
for any non-standard
modifications to allow them to evaluate such
modifications and verify that they will not
compromise the normal use and safety of the
wheelchair.
Any modification of the original parameters and
set up could seriously compromise the safe
operation of the wheelchair causing harm both to
the user and the wheelchair itself.
After each adjustment made to the wheelchair, check
carefully that all parts are correctly fixed. Check that
all screws and nuts are tightened and that all moving
parts are functioning correctly.
Have the adjustment of your wheelchair checked at
least every 3 months by personnel qualified and
authorized to
PROGEO® products.
Exelle
28
requirements
carry out maintenance
6.2 List of parts for standard set up
or
on
figura 43