Id Card Settings - Kyocera ecosys M2735DW Operation Manual

User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration

ID Card Settings

If ID card authentication is enabled, select the authentication type.
NOTE
This functions appears when the Card Authentication Kit is activated.
Optional Applications (page 11-6)
1
2
Display the screen.
1
[System Menu/Counter] key > [User Login/Job Accounting]
NOTE
If the user authentication screen appears, enter your login user name and login
password and select [Login]. For this, you need to login with administrator privileges.
The factory default login user name and login password are set as shown below.
Model Name
ECOSYS M2735dw
ECOSYS M2640idw
2
[User Login Setting] > [ID Card Settings]
Configure the settings.
The following settings can be selected.
Item
Keyboard Login
Additional
*1
Authentication
*1 This function does not appear when the server type is set to [NTLM] or [Kerberos] in "Network
Authentication".
*2 This function appears when the server type is set to [Ext.] in Network Authentication.
Login User Name
3500
4000
When ID card authentication is enabled, select whether or not login by
keyboard is allowed.
Value: Permit, Prohibit
Select whether or not to require password entry after authenticating by ID
card.
Value: Off, Use Password, Use PIN
9-26
Login Password
3500
4000
Descriptions
*2