Kyocera ecosys M2735DW Operation Manual page 370

Troubleshooting > Troubleshooting
Message
Cannot process this
*1
job.
Cannot read data in this
ID card.
Cannot recognize.
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. For details
on Auto Error Clear, refer to the following:
Auto Error Clear (page 8-42)
F
Message
Failed to specify Job
*1
Accounting.
Failed to store job
retention data.
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. For details
on Auto Error Clear, refer to the following:
Auto Error Clear (page 8-42)
H
Message
High temperature.
Adjust room temp.
Checkpoints
―
―
―
Checkpoints
—
—
Checkpoints
—
10-20
Corrective Actions
This job is canceled because it is
restricted by User Authorization or
Job Accounting. Select [End].
In registration process, the ID card
information was not read correctly.
Hold again the ID card over the ID
card reading part.
If the same message still appears,
the ID card may not be compatible
with this product. Change it to
another ID card.
Make sure your ID card has been
registered.
Corrective Actions
Failed to specify Job Accounting
when processing the job externally.
The job is canceled. Select [End].
The job is canceled. Select [End].
Insufficient free space in the Job
Box. Try to perform the job again
after printing or deleting data from
the Job Box.
Corrective Actions
Adjust the temperature and the
humidity of your room.
Reference
Page
―
―
Card
Authentication
Kit(B)
Operation
Guide
Reference
Page
—
—
Reference
Page
—