Canceling A Print Job - Konica Minolta bizhub 306/266 User Manual

7
7.1.3

Canceling a print job

Printing of a print job can be stopped by using the Control Panel of this machine. However, the print job can
only be canceled in the print mode screen.
1
After confirming that the Printer Indicator flashes or lights up, press the Printer key.
2
Confirm that [PRINTER MODE PRINTING] appears in the Display of this machine.
% The shown message varies depending on the status of the machine.
3
Press the Clear/Stop key.
Confirmation message [JOB CANCEL] appears.
4
Use the +/, key to select [YES] , then press the OK key.
% Select [NO] to continue printing.
% If no key is pressed within five seconds, the machine continues printing.
[ACCEPTED] appears on the Display, and the print job is canceled.
Tips
When the Display shows one of the following messages, the print job can be canceled by repeating the
above Steps 2 and 3.
[PAPER EMPTY]
[PAPER JAM]
[PAPER SIZE ERROR]
[NO SUITABLE PAPER]
[INCORRECT PAPER SIZE]
[PAPER TYPE ERROR]
[*RECEIVING*]
[FRONT COVER OPEN]
7-4
PRINTER MODE
PRINTING
ADMINISTRATOR
JOB CANCEL
YES
NO
ACCEPTED
YES
NO
Printer operation 7.1
bizhub 306/266