3.2
Installation using installer
Install Procedure
The USB cable must be connected during the last installation step. Do not connect the USB cable to this
machine until a message appears on the screen instructing you to connect the cable.
1
Insert the printer driver CD/DVD-ROM into the CD/DVD-ROM drive of the computer.
% The required CD/DVD-ROM varies depending on the printer driver. Select the CD/DVD-ROM corre-
sponding to the printer driver used.
2
Open the printer driver folder on the CD/DVD-ROM, and double-click [Setup.exe].
% Depending on the settings on the computer, the UAC (User Account Control) dialog box may ap-
pear. Check the details, and continue.
The installer starts.
3
Select a language, then click [OK].
4
Click [Next].
5
After checking all terms in the license agreement, select [I accept the terms of the License Agreement],
then click [Next].
% If you disagree, you will not be able to install the driver.
6
Select this machine in [Select Model].
% To install the XPS driver, Select [KONICA MINOLTA XXX PCL XPS].
7
Select port [USB] to connect, then click [Next].
The installation starts.
8
When a message appears instructing you to connect the USB cable, connect the USB cable between
the computer and this machine.
% If the window instructing you to connect the USB cable does not appear, operate according to the
instructions on the currently displayed window.
9
Click [Finish].
bizhub 306/266
3
3-5