For Network Connection - Konica Minolta bizhub 306/266 User Manual

3
3.2.3

For network connection

To use this machine as part of a network, connect the computer with this machine via the network and check
the IP address and RAW port number (initial setting: [9100]) before installing the printer driver.
d
Reference
The IP address and RAW port number can be checked in [IPv4 Configuration]. For details on the network set-
tings, refer to "Network settings" of [User's Guide Network Administrator], and Web Connection - [Network]
- [TCP/IP Configuration] and [Network]-[IPv4 Configuration].
1
Insert the printer driver CD/DVD-ROM into the CD/DVD-ROM drive of the computer.
% The required CD/DVD-ROM varies depending on the printer driver. Select the CD/DVD-ROM corre-
sponding to the printer driver used.
2
Open the printer driver folder on the CD/DVD-ROM, and double-click [Setup.exe].
% Depending on the settings on the computer, the UAC (User Account Control) dialog box may ap-
pear. Check the details, and continue.
The installer starts.
3
Select a language, then click [OK].
4
Click [Next].
5
After checking all terms in the license agreement, select [I accept the terms of the License Agreement],
then click [Next].
% If you disagree, you will not be able to install the driver.
6
Select this machine in [Select Model].
% To install the XPS driver, Select [KONICA MINOLTA XXX PCL XPS].
7
Select port [Network] to connect, and click [Search].
The connected machine is automatically detected.
8
Select the IP address of the machine, then click [OK].
9
Click [Next].
% If the machine is not detected by [Search], you can enter the IP address directly.
The installation starts.
10
Click [Finish].
3-6
Installation using installer
bizhub 306/266
3.2