Ftp; Advanced Configuration; User Configuration - Navaio NGC-7332V User Manual

Page 24
6. Receival email address: Receiver's e-mail address.
7. After all parameters set up, you can click "Test your account settings". If email sent
successful, a "Test Successful" window will pop up, if not, users can try other email addresses
or check the setting.
Notice: If you change the static IP into PPPoE and select mailbox, there will be an e-mail sent
to your mail box for notifying a new IP address.

4.5.9 FTP

Go to Network ConfigurationFTP interface as shown below.
1. Add: Click Add button to input FTP server's server name, address, port number, user name,
password, and upload path, click OK to confirm the setting.
2. Modify: Click this button to change some information of the FTP server.
3. Delete: Select a certain FTP account and click this button to delete this account.
4. Test: Select a certain FTP account and click this button to test its validity.
Please refer to the following table for parameters and instructions of FTP configuration.

4.6 Advanced Configuration

Advanced configuration includes four submenus: User Configuration, Security Configuration,
Configure Backup & Restore, Reboot and Upgrade.

4.6.1 User Configuration

Go to "User Configuration" interface.
Add user:
IP CAMERA USER MANUAL
Parameter
Server name
Server address
Port
User name
Password
Path
Meaning
The name of the FTP server
The address of the FTP server
The port number of the FTP server
The user name of the FTP server
The password of the FTP server
The save path for FTP files