Ie Remote Access; Lan; Access Through Ip-Tool - Navaio NGC-7332V User Manual

Page 2
IP CAMERA USER MANUAL

2 IE Remote Access

You may connect IP Camera via LAN or WAN. Here only take IE browser (6.0) for example.
The details are as follows:

2.1 LAN

In LAN, there are two ways to access IP Camera: 1. Access through IP-Tool; 2. Directly
access through IE browser.

2.1.1 Access through IP-Tool

① Make sure the PC and IP-Cam are connected to the LAN and the IP-Tool is installed in the
PC from the CD.
② Double click the IP-Tool icon on the desktop to run this software as shown below:
③ Modify the IP address. The default IP address of this camera is 192.168.226.201. Click the
information of the camera listed in the above table to show the network information on the
right hand. Modify the IP address and gateway of the camera and make sure its network
address is in the same local network segment as the computer's. Please modify the IP address
of your device according to the practical situation.
For example, the IP address of your computer is 192.168.13.4. So the IP address of the camera
shall be changed to 192.168.13.X. After modification, please input the password of the