Alarm Out; Network Configuration; Port - Navaio NGC-7332V User Manual

Page 19
IP CAMERA USER MANUAL
1. Select the sensor.
2. The following setup steps are similar to Motion Detection Schedule's. Please refer to
Motion Detection Schedule chapter for more details.

4.4.6 Alarm Out

1. Go to "Alarm configuration" "Alarm output" as shown below:
2. Select alarm holding time and alarm name at the "Alarm out" and "Alarm holding time"
pull down list box respectively.
3. Press the "Save" button to save the settings.

4.5 Network Configuration

Network configuration includes eight submenus: Port, IP address, Server Configuration, IP
Notify, DDNS Config, RTSP, UPnP, Mail Setting and FTP.

4.5.1 Port

1. Go to "Network config" "Port" to see the interface as shown below.
