Ftp Setting - Navaio NGC-7225V User Manual

Network Camera User Manual
1. From Email: sender's e-mail address.
2. User name and password: sender's user name and password.
3. Server address: SMTP name of sender.
4. Select the secure connection type at the Secure Connection pull down list according to user'
actual needs.
5. Receival email address list: add email address into the list.
6. Receival email address: receiver's e-mail address
7. After all parameters set up, you can click "Test your account settings". If email sent
successful, a "Test Successful" window will pop up, if not, users can try other email addresses
or check the setting.
Notice: If you change the static IP into PPPoE and select mailbox, there will be an e-mail sent
to your mail box for notifying a new IP address.

4.4.9 FTP Setting

Go to Network ConfigurationFTP Setting interface as shown below.
1. Add: Click Add button to input FTP server's server name, address, port number, user name,
password, and upload path, click OK to confirm the setting.
2. Modify: Click this button to change some information of the FTP server.
3. Delete: Select certain FTP account. Click this button to delete this account.
4. Test: Select certain FTP account. Click this button to test its validity.
Please refer to the following table for parameters and instructions of FTP configuration.
22