Table of Contents
Advertisement
Page 9
4 Remote Live Surveillance
Functions of remote configurations include: System Configuration, Video Configuration, PTZ
Configuration, Alarm Configuration, Network Configuration and Advanced Configuration.
You should firstly select the menu on the left, and then set up the relative parameters. When
one user configures parameters of a certain device, other users can not set up this device.
4.1 System Configuration
The "System configuration" includes three submenus: Basic Information, Date & Time and
SD card.
4.1.1 Basic Information
In the "Basic Information" interface, you can set up the device name and can also check the
relative information of the server.
Setting steps:
1. Clicking the "Config" icon will appear the menu list.
2. Clicking the "Basic Information" will pop up a window as shown below:
3. Input the name of the device in the "Device name" text box.
4. Press the "Save" button to save the settings.
Please refer to the following table for parameters and instructions of server basic
configuration.
Software version
Software build date
Kernel version
Hardware version
Mac Address
Maximum number of user
Device name
IP CAMERA USER MANUAL
Parameter
Meaning
The software of the device
The software build date of the device
The kernel version of the device
The hardware version of the device
MAC address of device
Support max 10 users to access
Name of the device.
Hide quick links:
Advertisement
Table of Contents
