Motion Detection Schedule - Navaio NGC-7332V User Manual

Page 17
IP CAMERA USER MANUAL
Alarm Out: If selected, this would trigger the external relay output on detecting a motion
based alarm.
Trigger Snap: If selected, the system will snap images on an alarm and save them in SD card.
Trigger Email: If the email and attach picture checkbox is checked (Email address shall be
set first in the Mail config interface), the triggered snap pictures and event will be sent into
those address.
Trigger FTP: If "Uploading picture" is checked, the triggered snap pictures will be sent into
FTP server address. Please refer to FTP configuration chapter for more details.
5. Press the "Save" button to save the settings.

4.4.3 Motion Detection Schedule

Go to "Alarm configuration" "Motion Detection schedule" interface as shown below.
Week schedule
User could set the alarm time from Monday to Sunday for alarm everyday in one week.