Security Configuration; Configure Backup & Restore - Navaio NGC-7332V User Manual

Page 26
Note: The default super administrator cannot be deleted.
Parameter
User Name
User Type
Binding MAC address
Password
Confirm Password

4.6.2 Security Configuration

1. Go to Advanced Configuration
2. Check "Enable IP address" check box, select "Deny the following IP address", input IP
address in the IP address list box and click "Add" button. Then this IP address will display in
the list box; the operation step of "Allow the following IP address" is the same with "Deny
the following IP address".
3. Select the IP address which needs to be deleted from the IP address list box and click
"Delete" button to delete that IP address.
4. Check "Enable MAC address" check box, select "Deny the following IP address", input
MAC address in the MAC address list box and click "Add" button. Then this MAC address
will display in the list box; the operation step of "Allow the following MAC address" is the
same with "Deny the following IP address".
5. Select the MAC address which needs to be deleted from the MAC address list box and
click "Delete" button to delete that MAC address.
6. Click "Save" button to save the above setting.
4.6.3 Configure Backup & Restore
Go to Advanced configurationConfigure Backup & Restore Interface.
IP CAMERA USER MANUAL
User name to operate the logon client end
Type of users, normal user, advanced user and super administrator
The MAC addresses of user access the server which should set up
according to actual MAC address of server.
Password to log in the client terminal
Password to log in the client terminal

Security Configuration to see a tab shown below.
Meaning