Directly Access Through Ie - Navaio NGC-7332V User Manual

Page 3
administrator and click "Modify" button to modify the setting.

The default password of the administrator is "123456".
④ Double click the IP address and then the system will pop up the IE browser to connect
IP-CAM. IE browser will auto download the Active X control. After downloading, a login
window will pop up as shown below.
Input the username and password to log in.

The default username is "admin"; the default password is "123456".

2.1.2 Directly Access through IE

The default network settings are as shown below:
IP address: 192.168.226.201
Subnet Mask: 255.255.255.0
Gateway: 192.168.226.1
HTTP: 80
Data port: 9008
You may use the above default settings when you log in the camera for the first time.
① Manually set the IP address of the PC and the network segment should be as the same as
the default settings of the IP camera. Open the network and share center. Click "Local Area
Connection" to pop up the following window.
IP CAMERA USER MANUAL