Table of Contents
Advertisement
Page 11
IP CAMERA USER MANUAL
4.2.1 Camera Configuration
Setting steps:
1. Go to "Video Configuration" "Camera" interface as shown below.
2. You may choose the frequency and adjust brightness, contrast, hue and saturation of the
picture.
3. Select white balance mode.
4. Wide dynamic, sharpen, and denoise are adjustable.
5. You can also set day-night mode, enable the image mirror and image overturn function and
choose the sensitivity, infrared mode and exposure type.
6. Press the "Save" button to save the settings.
4.2.2 Video Stream
Go to "Video configuration"
"Video Stream" to see an interface as shown below.
Three video streams can be adjustable.
Resolution: The higher the resolution is, the clearer the image is.
Frame rate: The higher the frame rate is, the more fluency the video is. However, more
storage room will be taken up.
Bitrate type: Including CBR and VBR. CBR means that no matter how changeable the video
resources are, the compression bitrate keeps constant. This will not only facilitate the image
quality better in a constant bitrate but also help to calculate the capacity of the recording.
Hide quick links:
Advertisement
Table of Contents
