Ptz Configuration; Protocol; Preset Configuration - Navaio NGC-7332V User Manual

Page 15

4.3 PTZ Configuration

PTZ Configuration includes two submenus: Protocol and Preset.

4.3.1 Protocol

1. Go to "PTZ Configuration" "Protocol" interface as shown below:
2. Input the protocol, address and baud rate according to the speed dome.

4.3.2 Preset Configuration

1. Go to "PTZ Configuration" "Preset" to see an interface as shown below:
Button
IP CAMERA USER MANUAL
to rotate the dome upwards;
to rotate the dome towards left;
to stop rotating the dome.
Focus button. Click
to have short focus.
Zoom button. Click
button to zoom out the locale picture.
Iris button. Click
button to decrease the light of the dome.
Drag the scroll bar to adjust rotating speed of the dome.
Meanings
to rotate the dome downwards;
to rotate the dome towards right;
button to have long focus; click
button to zoom in the locale picture ; click
button to increase light of the dome; click
button