Wan - Navaio NGC-7332V User Manual

Page 4
IP CAMERA USER MANUAL
Select "Property" and then select internet protocol according to the actual situation (for
example: IPV4). Next, click "Property" button to set the network of the PC.
② Open the IE browser and input the default address of IP-CAM and confirm. The IE
browser will download Active X control automatically.
③ After downloading Active X control, the login dialog box will pop up.
④ Input the default username and password and then enter to view.

2.2 WAN

Take access the camera by the router or virtual server for example
① Make sure the camera is well connected via LAN and then log in the camera via LAN and
go to the ConfigNetwork ConfigPort menu to set up the port number.