Alarm Configuration; Motion Detection Area - Navaio NGC-7225V User Manual

Network Camera User Manual
2. Check "Enable" and then click "Draw" button.
3. Drag the mouse to set the ROI area.
4. Set the level.
5. Click "Save" button to save the settings.
Now, you will see the selected ROI area is clearer than other areas especially in low bitrate
condition.

4.3 Alarm Configuration

Alarm configuration includes four submenus: Motion Detection Area, Motion Detection
Trigger, Motion Detection Schedule and Alarm Server.

4.3.1 Motion Detection Area

1. Go to "Alarm configuration" "Motion Detection Area" to see an interface as below.
2. Move the "Sensitivity" scroll bar to set up the motion trace sensitivity.
3. Check the "Add", press the "Ctrl" button and move mouse to select the motion detection
area. Select "Erase" and move the mouse to clear all motion detection area.
4. Press the "Save" button to save the settings.
15