Camera Management; Quick Adding Ip Cameras - HIKVISION DS-9508NIST Quick Operation Manual

Quick Operation Guide of Network Video Recorder
On the top right corner, language is selectable between Chinese and English.
2. Input the correct user name and password, click Login to enter the live view interface, or it will pop up an
error box.
You can click Logout on the top-right corner to log out and return to the login interface.
 The default IP address is 192.0.0.64.
 The default user name is admin, and password is 12345.
 You may use one of the following listed web browsers: Internet Explorer 6.0, Internet Explorer 7.0,
Internet Explorer 8.0, Internet Explorer 9.0, Internet Explorer 10.0, Apple Safari, Mozilla Firefox, and
Google Chrome.
 The supported resolutions include 1024*768 and above.
When you log in for the first time, the system will remind you to install the Plug-in control. After the installation,
you can configure and manage the device remotely.

Camera Management

Purpose:
The main function of the NVR is to connect the network cameras and record videos. So before you can get a live
view or record of the video, you should add the network cameras to the connection list of the device.
You can enter the camera management interface by:
Configuration> Remote Configuration> Camera Management> IP Camera

Quick Adding IP Cameras

DS-8500/9500NI-ST and DS-9500NI-RT series NVR provides a function of remote auto-searching IP camera.
When there are supported IP cameras in the same network segment of a LAN with NVR, you can add them with
one button configuration function with default user name, password and port number.
Before applying Quick Add function, please make sure that IP camera is compatible with NVR and default
user name, password, and port number are not changed.
Steps:
1. Click Quick Add button, the on-line IP cameras will be listed as figure below:
15