Osd Configuration; Video Mask - Genie WIP1VD User Manual

Network Camera User Manual

4.2.3 OSD Configuration

Go to "Video Config"  "OSD Config" menu to display the interface as shown below.
You may set time stamp, device name and custom OSD here. Drag the time stamp and custom
OSD to set their position. Then press the "Save" button to save the settings.

4.2.4 Video Mask

Go to "Video Config"  "Video Mask" menu to display the interface. You can set 4 mask
areas at most.
To set up video mask
1. Enable video mask.
2. Click "Draw" button and then drag the mouse to draw the video mask area.
13