Video Configuration; Camera - Genie WIP1VD User Manual

Network Camera User Manual
1. Go to System ConfigDate & Time menu as shown below.
2. Set time zone.
3. Enable DST mode as required.
4. Set time. You may set time manually or enable NTP.

4.2 Video Configuration

Camera Configuration includes five submenus: Camera, Video Stream, OSD Config, Video
Mask and ROI Config.

4.2.1 Camera

Setting steps:
1.Go to "Video Configuration"  "Camera" interface as shown below.
2. You may adjust frequency, brightness, contrast, hue and saturation of the picture.
3. Select white balance mode.
11