Related Manuals for Genie WAHD2DVAF
Summary of Contents for Genie WAHD2DVAF
- Page 1 2MP 4-in-1 AHD IR Vandal Resistant Dome Camera with 2.8-12mm Auto Focus Lens WAHD2DVAF User Manual Please read these instructions carefully before operating the unit and keep for further reference.
- Page 2 Intro Section Please read this instruction carefully before operating the product and keep it for further reference. All examples and pictures used here are for reference only. The contents of this manual are subject to change without notice. CAUTION: • If the product does not work properly, please contact your dealer or the nearest service center.
-
Page 3: Table Of Contents
Contents 1.0 Introduction ......................4 1.1 Product Features ...................4 1.2 Product Dimensions ..................4 1.3 Specification....................5 1.4 Functions ......................6 2.0 Cables ........................7 3.0 Product Installation....................8 4.0 Call Up Main Menu ....................9... -
Page 4: Introduction
1.0 Introduction The Genie WAHD2DVAF is a professional, modern dome design CCTV camera that boasts 4-in-1 technology (AHD, TVI, CVI, CVBS) and utilises a 2.8-12mm auto focus lens. The camera offers IP67 and IK10 protection and up to 30m viewing when the IR illumination is switched on. -
Page 5: Specification
User Manual 2MP 4-in-1 AHD IR Vandal Resistant Dome Camera with 2.8-12mm Auto Focus Lens 1.3 Specification Image Sensor 1 / 2.8” CMOS Image Size 1920x1080 Image System PAL / NTSC Resolution Electronic Shutter Auto: 1/25s~1/50000s (PAL), 1/30s~1/50000s (PAL) Camera Minimum Illumination Colour : 0.001 Lux @ F1.2, AGC ON: B&W : 0 Lux with IR Lens... -
Page 6: Functions
User Manual 2MP 4-in-1 AHD IR Vandal Resistant Dome Camera with 2.8-12mm Auto Focus Lens 1.4 Functions High Resolution Adopt high performance sensor, providing high definition and clear image. High Transmission Performance Real-time transmission with high speed and long distance. Reduce noise from brightness and colour signal. -
Page 7: Cables
2.0 Cables The cables are only for reference. The default video output will be different for different cameras. For the camera with video switch cable, there are two kinds of video switches, button switch and dial switch. Button Switch: The video outputs will recycle by holding and pressing the button in the video switch cable for 5 seconds. -
Page 8: Product Installation
3.0 Product Installation Before you start, please make sure that the wall or ceiling is strong enough to withstand 3x the weight of the camera. Please install the camera in the dry environment. Loosen the screws to open the lower 6. -
Page 9: Call Up Main Menu
4.0 Call Up Main Menu Access Main Menu Press Enter key of the rear panel or cable of the camera to go to the main menu. 2. Select the preview window and right click the mouse to show the following menu list on the DVR. - Page 10 Sales +44(0)1707 330541 Enquiries sales@genieproducts.co.uk Website www.genieproducts.co.uk...
Need help?
Do you have a question about the WAHD2DVAF and is the answer not in the manual?
Questions and answers