94 RV125K7 ('07-MODEL)
CABLE AND HOSE ROUTING
CABLE ROUTING
1 Throttle cable No.1
2 Throttle cable No.2
3 Wiring harness
4 Clutch cable
5 Harness
*2
0 mm
Pass the throttle cables in front of
*1
the brake hose.
Pass the throttle cables above
*2
the wiring harness.
Set the thread part of throttle
*3
cables to lowest position.
*1
*3
0 mm
*4
*5
*6
*4 Set the clamp as shown.
*5 Clamp the harness only.
Set the upper end of clutch cable
*6
protector to the lower end of clamp.
*7 Cotter pin must face upper side.
*7